Lucent Technologies merlin messaging system User Manual
Setting the Transfer Return Time
The Transfer Return Time is the number of times a transferred call will ring at the transfer
destination before it returns to the extension from which it was transferred.
destination before it returns to the extension from which it was transferred.
If
Then
All extensions are covered by the MERLIN
Messaging System only
Messaging System only
You must set the Transfer Return Time to a
value > the Coverage Delay Interval
value > the Coverage Delay Interval
Any extension has both Personal Coverage and
Group Coverage by the MERLIN Messaging
System
Group Coverage by the MERLIN Messaging
System
You must set the Transfer Return Time to a
value > the sum of the Coverage Delay and
Delay Ring Intervals
value > the sum of the Coverage Delay and
Delay Ring Intervals
Note:
The factory setting is four rings.
●
Refer to your communications System Planning Form
containing System Features information to locate the Transfer
Return Time identified for your site
containing System Features information to locate the Transfer
Return Time identified for your site
●
Procedure
Setting the Transfer Return Time
http://www.sostc.com/lucent/installation/programming_the_communication_system/mmipcpcs2a.htm [2/2/2000 2:33:22 PM]