Lucent Technologies merlin messaging system User Manual
Programming Labels
You may program labels to identify your Calling Group and MERLIN Messaging System ports. This will
cause the names you program to appear on display telephones when:
cause the names you program to appear on display telephones when:
The MERLIN Messaging System is dialed.
●
A call is received or transferred from the MERLIN Messaging System.
●
Refer to the communications System Planning Form containing System Numbering: Extension Jacks
information to identify labels.
information to identify labels.
To program labels:
Step
Programming Task
Console Input/Selection
PC Input/Selection
1
Enter programming mode
Sys Program
Exit/Start
[any key]
2
Display next page of menu
/
3
Select Labeling
Labeling
4
Select Group Calling
Grp Calling
5
Enter the extension number of the
MERLIN Messaging System Calling
Group
MERLIN Messaging System Calling
Group
[nnn]
Enter
[nnn]
6
"MERMSG" or some other
designation that would identify the
calling group
designation that would identify the
calling group
[nnnnnnn]
Enter
[nnnnnnn]
7
Return to the previous menu
Exit/Back
8
Select Directory
Directory
9
Select Extension
Extensions
10
Enter the extension number of the
MERLIN Messaging System port
MERLIN Messaging System port
[nnn]
Enter
[nnn]
11
To erase current current label
or
Backspace
+
or
12
Enter "MERMSG" or some other
designation that would be meaningful
for the MERLIN Messaging System
designation that would be meaningful
for the MERLIN Messaging System
[nnnnnnn]
[nnnnnnn]
13
Save your entry
Enter
Programming Labels
http://www.sostc.com/lucent/installation/programming_the_communication_system/mmipcpcs8.htm (1 of 2) [2/2/2000 2:33:56 PM]