Lucent Technologies merlin messaging system User Manual
Logging in to Terminal-Based Reporting, Maintenance and
Administration
Administration
Before you log in, you must connect your PC to the MERLIN Messaging System module. The following
procedures are the two access methods available for accessing the MERLIN Messaging System.
procedures are the two access methods available for accessing the MERLIN Messaging System.
After you configure your terminal emulator for a local or remote session, start the program and connnect
to the MERLIN Messaging System. Once your PC is connected to the MERLIN Messaging System and
you have a login prompt, use the following procedure to log in to MERLIN Messaging System
Administration.
to the MERLIN Messaging System. Once your PC is connected to the MERLIN Messaging System and
you have a login prompt, use the following procedure to log in to MERLIN Messaging System
Administration.
Step
Action
Remote Access
Local Access
1
Access MERLIN Messaging System
Dial in to MERLIN
Messaging System
Messaging System
Connect RS-232 cable
to RS-232 serial port
to RS-232 serial port
2
A Welcome to Merlin Messaging
message
message
3
Enter login
Note:
If you do not enter your login
within 30 seconds, MERLIN
Messaging terminates the
session.
within 30 seconds, MERLIN
Messaging terminates the
session.
[nnnnnn]
[nnnnnn]
4
Enter the System Administration
password
password
Note:
If you do not enter your login
within 30 seconds, MERLIN
Messaging terminates the
session.
within 30 seconds, MERLIN
Messaging terminates the
session.
[nnnnnn]
[nnnnnn]
Related Topics
Logging in to Terminal-Based Reporting, Maintenance and Administration
http://www.sostc.com/lucent/ongoingmaintenance/terminalbased/mmomali1.htm [2/2/2000 2:35:11 PM]