Rinnai RHFE-750ETRA User Manual

 

Rinnai Corporation RHFE-750ETRA                                                            27 

  Final 

1.  Remove the two retaining screws that secure the 

combustion chamber glass panel.   

2.  Rotate and lift the combustion chamber glass clear 

of the combustion chamber and place in a safe 
location. 

3.  Seat the rear log into the combustion chamber 

onto its location pins. 

4.  Seat the left hand middle log onto its location pins. 

5.  Seat the right hand middle log onto its location 

pins. 

6.  Seat the center top log onto the location pins. 

7.  Seat the right hand top log onto the location pins. 

8.  Place the left hand front log and the right hand 

front log on the pins. 

9.  Install the glass panel with two retainer screws at 

the top of the panel.   

•  rear 
•  left hand middle 
•  right hand middle 
•  center top 

•  right hand top 
•  left hand front 
•  right hand front 

The log set consists of seven pieces as follows: 

Step 3 

Steps 
 6 & 7 

Step 8 

Steps  

4 & 5