Alliance Laundry Systems Clothes Dryer User Manual

Operation

512686

Step 4: Determine Proper Dryer

The direction of the arrow indicates which dryer is

being used.

Figure 33

Step 5: Set Fabric Selector

Select NORMAL for cottons, PERM PRESS for

permanent press, DELICATE for sensitive items or

FLUFF (NO HEAT) for items that require no heat.

NOTE: Always follow manufacturer’s care label

instructions.

Figure 34

Step 6: Start Dryer
Nonmetered Models

Rotate timer knob to desired time setting (up to

60 minutes). Press the PUSH-TO-START button.

IN USE light will come on (indicating start of cycle).

Figure 35

Coin Slide Models

Place coin(s) in slide and carefully push in as far as

possible and then pull slide out as far as possible. After

IN USE light comes on (indicating start of cycle),

press the PUSH-TO-START button.

Remove knits when slightly damp because overdrying

may cause shrinkage. Do not tumble dry knit woolens.
Should dryer stop before cycle is completed, the motor

overload protector may have cycled. Refer to

Maintenance section.

NOTE: This machine includes an extended tumble

feature. Starting 20 minutes after a cycle ends, the

cylinder will tumble for two minutes every hour

without heat, up to 18 hours or until door is

opened.

DRY2140N

DRY2100N

DRY2101N

D363I

Figure 36

NONMETERED MODELS

W297I

METERED MODELS