Alliance Laundry Systems Clothes Dryer User Manual

Vending

512686

6. Check to make sure coin slide is operating

properly by inserting coins and starting a cycle.

The IN USE light will turn on, or flash if it is

already on, to indicate proper operation.

NOTE: To avoid long run-down time (45 minutes

factory default) when testing operation, refer to

Test Setting section.

Installing Extension Onto Coin Slide:
Option 2

1. Install coin slide according to manufacturer’s

instructions.

2. Insert coins into coin slide and slowly push slide

in. Stop before coins fall into coin box. This will

allow installing extension through meter case

service door opening.

3. Install slide extension onto top of coin slide using

two screws and lockwashers. Refer to Figure 28.

NOTE: Make sure extension lever is above switch

activation lever.

4. Check to make sure coin slide is operating