Elo TouchSystems ET7001L User Manual

Page of 36
 
User Manual: Interactive Digital Signage 
SW601990 Rev E, Page 29 of 36 
 
Chapter 7: Safety & Maintenance
 
Safety 
To avoid risk of electric shock, follow all safety notices and do not disassemble the touchmonitor 
or Computer Module. They are not user-serviceable. 
 
Do not block or insert anything inside any of the ventilation slots. 
 
The touchmonitor is equipped with a 3-wire, grounding power cord. The power cord plug only 
fits into a grounded outlet. Do not fit or modify the plug into an outlet that has not been 
configured for this purpose. Do not use a damaged power cord. Only use the power cord that 
came with your Elo Touchmonitor. Use of an unauthorized power cord may invalidate your 
warranty. 
 
Ensure that the system is maintained and runs within the specified environmental conditions 
listed in the products specifications available on the Elo Touch Solutions website 
www.elotouch.com. 
 
 
Environmental conditions for transportation and storage 
 
Temperature: 
Portrait and Landscape Mode: 
   Operating                                       0°C to 40°C 
                                Storage/Transportation          -20°C to 50°C 
 
       Table Top Mode 
Operating Temperature (Independent of altitude): 0°C to 35°C   
Non-Operating Temperature (Independent of altitude): -20°C to 50°C 
 
Humidity (non-condensing) :     
Operating                                     20% to 80% 
                                Storage/Transportation         10% to 95% 
 
Altitude: 
                               Operating                                       0 to 3,658m 
                               Storage/Transportation       0 to 12,192m