Firstech, LLC. CM1000A User Manual

 

 

- 24 - 

CONNECTOR 7  

(Pre-wired Shock Sensor) 

 
Pin 1 Black-Shock sensor (-) negative ground input. 
 
Pin 2 White-Shock sensor 2

nd

 stage  (-) negative input. (Instant trigger) 

 
Pin 3 Red-Shock sensor 12-volt (+) positive input. 
 
Pin 4 Yellow-Shock sensor 1

st

 stage (-) negative input. (Warn away) 

 
 

CONNECTOR 8  

(Optional add on sensors; i.e. proximity) 

 
Pin 1 Gray/White- Optional sensor 1

st

 stage (-) negative input. (Warn away) 

 
Pin 2 Black/White-Optional sensor 2

nd

 stage  (-) negative input. (Instant trigger) 

 
 

CONNECTOR 9  

(Pre-wired Remote Paging Sensor or R.P.S.) 

 
Pin 1 Black-R.P.S. sensor (-) negative ground input. 
 
Pin 2 White-R.P.S. sensor (-) negative paging input. 
 
Pin 3 Red-R.P.S. sensor 12-volt (+) positive input. 
 
Pin 4 Yellow- R.P.S. sensor 9-volt (+) positive L.E.D. output 
 
 

CONNECTOR 10  

(Optional Temperature sensor) 

 
Pin 1 Gray-12-volt (+) positive output. This wire will provide 12-volt (+) positive to 

temperature sensor. 

 
Pin 2 Brown-Temp sensor (-) negative input. This wire will activate remote start when 

provided a (-) negative input. (Note: If vehicle is remotely started, a (-) negative 
input will turn the vehicle off.) 

 
Pin 3 Black-Temp sensor (-) negative ground output.