Firstech, LLC. CM1000A User Manual

 

 

- 30 - 

CONNECTOR 4 

 
Pin 1 Not used 
 
Pin 2 Violet/White- Trunk release 250mA (-) negative output. This wire will provide a (-

) negative trigger pulse.  (Note: Positive trigger trunk release will require a relay.  
System will unlock doors and disarm alarm prior to trunk release.) 

 
Pin 3 Orange/Black- 2

nd

 Unlock 250mA (-) negative output. This wire is an optional 

output that will provide a (-) negative pulse output for driver’s priority door lock.  
(Note: This feature will require additional relays and programming.) 

 
Pin 4 Blue- Unlock 250mA (-) negative output. This wire will provide a (-) negative 

pulse output during unlock and disarm. (Note: Positive and reverse polarity will 
require additional relays.) 

 
Pin 5 Blue/Black- Lock 250mA (-) negative output. This wire will provide a (-) negative 

pulse output during lock and arm. (Note: Positive and reverse polarity will require 
additional relays. 

 
Pin 6 Not used. 
 
 

CONNECTOR 5 

(Pre-wired L.E.D.)

 

 
Pin 1 Black-L.E.D. - (-) negative output.  
 
Pin 2 Black/White - 3-volt L.E.D. (+) positive output. 
 
 

CONNECTOR 6 

(Pre-wired Shock Sensor)

 

 
Pin 1 Black-Shock sensor (-) negative ground input. 
 
Pin 2 White-Shock sensor 2

nd

 stage  (-) negative input. (Instant trigger) 

 
Pin 3 Red-Shock sensor 12-volt (+) positive input. 
 
Pin 4 Yellow-Shock sensor 1

st

 stage (-) negative input. (Warn away)