Siemens 1190 User Manual
Functions used for making calls
37
Step by step
Calling an Attendant Console (AC)
1
An Attendant Console can be called at any time for mak-
ing a call or simply for consultation.
Enter the code for calling the Attendant Console.
Wait for the call to be answered. Initiate conversation.
Direct Communication Call
This features enables sending voice messages to Sys-
tem telephones using the speakerphone. A message
can be sent to an extension or a Call Group (CG).
When a message is sent, the called party hears a warn-
ing signal before the message is played and the display
shows the caller’s name and number.
Required: Destination number uses a Profiset 3030 or
an optiPoint with a speakerphone telephone.
Press this key.
>
:
Select and press to confirm.
or
Enter the code for direct messaging.
Enter an extension or Call Group (CG), e.g., 11/101 or
770).
Record the message.
Answer the call
Lift the handset.
or
Press this key. The LED turns on.
Initiate conversation.
[1] When no extension is programmed as an Attendant and "9" is en-
tered, a busy signal is heard.
9
Service Menu
*80=SPEAKER CALL ?
0
*
8
Speaker
oi.book Seite 37 Mittwoch, 16. August 2006 8:41 08