Siemens 1190 User Manual

The Transfer feature allows an extension to transfer a 

call (incoming or outgoing) to another extension or to an 

external number.

Required: A call is in progress.

>

:

Select and press to confirm.

Enter the extension or external number.

) Let the caller know that there is a second call.

:

Press to confirm.

Replace the handset.

Press this key. The LED turns off.

When there is an external call in progress, an extension 

can make a consultation to another external number 

and transfer the call, as described above. 

Once the call is transferred and answered at the desti-

nation, a disconnect timer is activated (default is 5 min-

utes). A 20-second warning tone is sent to both parties 

before the call is disconnected. In order to continue the 

call without disconnecting, the destination number 

must enter a code (MF, default "00") to restart the time-

out., The call disconnect timeout and the Code to reset 

it are configurable. Please ask your System Support 

Technician for more information.

[1] If a transfer’s destination extension does not answer, the call is re-

turned to the calling extension.

 

An External-to-External transfer can only be made when at least 
one of the calls is an outgoing call.

 

A call cannot be transferred to an Entrance Telephone, neither can 
an Entrance Telephone transfer a call.

 

A call can only be transferred to a busy extension if "Transfer when 
Extension is Busy" feature is enabled (see Programming Manual - 
Programming an Extension - Transfer when Extension is Busy). In 
addition, this can only be carried out within the limitations specific 
for "Urgent Call/Callback when Busy".

Speaker

[2] A call is terminated under three conditions:

 

• Disconnect timeout after and external-to-external transfer (Code 
183)

 

• When a busy signal is detected

 

• Type of Answering Signal (Code 158) detected.

oi.book  Seite 45  Mittwoch, 16. August 2006  8:41 08