Siemens 1190 User Manual

If the Support Technician configured the alarm feature 

for your extension, it will ring whenever there is an 

alarm condition on the HiPath 1100.

Answer the call to acknowledge that the alarm was de-

tected. If the alarm call is not acknowledged, a new at-

tempt at a call will be made (as programmed) and the 

extension will ring again.

Required:The display shows "CALL: RLA CHK..." and 

your telephone will ring three times (three short beeps) 

at 4-second intervals.

Lift the handset.

Press this key. The LED turns on.

Replace the handset.

Press this key. The LED turns off.

If an alarm system has been activated, in addition to the 

alarm signal, it can be deactivated.

  Enter the code for deactivating a general alarm.

Enter the access code (default is 31994).

The Alarm Clock allows you to program an extension to 

send the user a reminder at a specific time, at fixed 

time intervals or cyclically.

To use this feature you must specify and store the time 

when the reminders alerts should be sent. Time alerts 

can be set for:

• Daily reminders

• Daily except weekends

• A reminder after a specified period of time

• A reminder for a specific date

Speaker

Speaker

oi.book  Seite 83  Mittwoch, 16. August 2006  8:41 08