Lucent Technologies 4.1 User Manual

This System Programming procedure copies all of the following settings from
one extension to another:

#301 Line Assignment
#302 Line Access Restriction
#303 Display Language
#304 Automatic Extension Privacy
#305 Abbreviated Ringing
#307 Forced Account Code Entry
#308 Distinctive Ring
#309 Intercom Dial Tone
#310 Automatic VMS Cover
#311 External Hotline
#312 Voice Interrupt On Busy
#313 Line Access Mode
#314 Pool Extension Assignment

#315 Pool Access Restriction
#316 Call Waiting
#401 Outgoing Call Restriction
#405 Disallowed List Assignments
#408 Allowed List Assignments
#501 Pickup Group Extensions
#502 Calling Group Extensions
#504 Night Service Group
#505 Hunt Group Extensions
#601 Fax Machine Extensions
#607 AA Extensions
Automatic Line Selection
Line Ringing

■

■

■

This procedure is skipped in the sequence of programming procedures
when cycling. To use this procedure, enter the code (#399) directly.

For each type of phone, program one extension, then use this procedure to
copy the programming from that extension to the others with the same
number of line or pool buttons (for example, from a PARTNER-18D phone to
a PARTNER-18 phone).

Pooled extension settings can be copied to key extensions, except for
extension 10. Key extension settings can be copied to pooled extensions.

To copy the programmed settings from one extension to another of the same
type:

1.

Press [

] [

] [

] [

] [

] [

] [

] [

] [

].

2.

At the 

Extension: 

prompt, enter the source extension to copy from. For

example, to copy the current settings from extension 18, press [

] [

].

3.

At the 

Data --

prompt, enter the target extension to copy to—any extension

except the source extension is valid. For example, to copy to extension
22, press [

] [

].

4.

At this point:

■

■

To copy the same settings to another extension, enter the new
extension number.

To copy another extension’s settings, press [

] or [

] until

the extension number shows on the display. Then repeat Step 3.

5.

Select another procedure or exit programming mode.

Copy Settings (#399)