Lucent Technologies 4.1 User Manual

You can use the Call Coverage, VMS Cover, or Do Not Disturb buttons to send
intercom and transferred calls and outside calls on owned lines immediately
either to the covering extension or to your voice mailbox.

■

■

■

■

If Call Coverage is on and a call that is eligible for coverage begins to ring,
you can turn on Do Not Disturb to send that call and any subsequent calls
immediately to the covering extension. This allows callers to receive

If VMS Cover is on and a call that is eligible for coverage begins to ring, you

can turn on Do Not Disturb to immediately send that call and subsequent
calls to your voice mailbox. This allows callers to leave a message without

If Call Coverage and VMS Cover are both on, you can turn on Do Not
Disturb to send that coverage call and all subsequent calls immediately to

the covering extension. If there is no answer at the covering extension, the
calls go to your voice mailbox after the number of rings specified with VMS
Cover Rings (#117).

Use Line Coverage Extension (#208) to identify an extension as the owner

of a specific outside line.

To send a covered call immediately to the covering extension:

■

If Call Coverage is not turned on, while the call is ringing, press the Call
Coverage button.
The ringing call is sent immediately to the covering extension; subsequent

■

If Call Coverage is turned on, press the Do Not Disturb button.
All covered calls are sent immediately to the covering extension until you

To send a call immediately to the voice messaging system:

■

If VMS Cover is not turned on, while the call is ringing, press the VMS Cover

button.
The ringing call is sent immediately to your voice mailbox; subsequent calls
go to your voice mailbox after the specified number of VMS Cover Rings.

■

If VMS Cover is turned on, press the Do Not Disturb button.
All covered calls are sent immediately to the voice messaging system until
you turn off Do Not Disturb.

To send covered calls immediately to coverage when Call Coverage and VMS
Cover are both on, press Do Not Disturb.
All calls go to the covering extension. If there is no answer, the calls go to your
voice mailbox.

Send All Calls