Lucent Technologies 4.1 User Manual

This feature accesses the loudspeaker paging system, if you have one
connected to the system through the PAGE jack on the primary processor

module, and all of the idle system phones with speakers assigned to Calling
Group 1.

■

You must use Calling Group Extensions (#502) to identify the extensions in

Calling Group 1.

■

Use Loudspeaker Paging  to make announcements only over the

loudspeaker paging system.

■

■

■

■

You can program a Simultaneous Paging button on a system phone to
access with one touch the loudspeaker paging system and idle system

phones with speakers in Calling Group 1.

If the loudspeaker paging system or Calling Group 1 is in use, a user
attempting to make an announcement hears a busy tone.

If someone answers a simultaneous page from a system phone in Calling
Group 1, the page becomes an intercom call.

If some extensions in Calling Group 1 have standard, MDC 9000, or MDW

9000 phones, those extensions are not included in the simultaneous page.

To program a Simultaneous Paging button:

1.

Press [

] [

] [

] [

] [

] [

].

2.

Enter the number of the extension to be programmed with this feature.

3.

Press a programmable button.

4.

Press left [

] [

 ★ 

] [

] [

].

5.

Program another button for this extension or exit programming mode.

To make an announcement over the loudspeaker paging system and the idle
system phones with speakers in Calling Group 1:

1.

Press the programmed button or [

] [

 ★ 

] [

] [

], then lift the handset.

2.

Speak into the handset. (To avoid feedback, do not use the speakerphone.)
Your voice is heard through the loudspeaker paging system and the

If your paging system supports announcements to zoned areas, refer to the
instructions packaged with the device to make zoned announcements.

Simultaneous paging ( I*70)