Lucent Technologies 4.1 User Manual

Possible Cause:  Not all calls on Caller ID lines will be displayed. This varies by local

phone company.

What to do: If Caller ID information for a large number of calls is not displayed, contact
your local telephone company.

Possible Cause 1: Telephone cord is plugged into wrong jack on bottom of Intercom

Autodialer.

What to do: Plug the modular telephone cord into the correct jack—see the PARTNER 

Communications System Installation guide for instructions.

■

If the Intercom Autodialer works properly, the problem is solved.

■

If the problem remains, go to Possible Cause 2.

Possible Cause 2: Intercom Autodialer is not receiving auxiliary power.

What to do: Make sure the Intercom Autodialer is plugged into an electrical outlet.

■

If the Intercom Autodialer works properly, the problem is solved.

■

If the problem remains, go to Possible Cause 3.

Possible Cause 3: The cord is defective.

What to do: Unplug the cord from the base of the Intercom Autodialer and the wall jack.
Replace the cord with a cord that you know works.

■

If the Intercom Autodialer works, the cord is faulty. Call the hotline* to arrange for a
replacement.

■

If the Intercom Autodialer does not work, call the hotline.*

✽

In the continental U.S., help is available at 1 800 628-2888. Outside the continental U.S., call your
Lucent Technologies Representative or local Authorized Dealer.

Troubleshooting