EFJohnson 9800 SERIES User Manual
GENERAL INFORMATION
1-3
February 2001
Part No. 001-9800-001
1.4 TRANSCEIVER IDENTIFICATION
The transceiver identification number is printed
on a label that is attached to the chassis. The informa-
tion is contained in this number is shown in Table 1-2.
This number is stored electronically and can be read
using the programming software.
tion is contained in this number is shown in Table 1-2.
This number is stored electronically and can be read
using the programming software.
1.5 ACCESSORIES
The accessories available for this transceiver are
listed in Table 1-3. The following is a brief description
of most of these accessories.
of most of these accessories.
Mounting Accessories - The -030 mounting kit
contains mounting knobs and four self-drilling screws.
The -610 kit contains mounting knobs, a remote
contains mounting knobs and four self-drilling screws.
The -610 kit contains mounting knobs, a remote
mounting bracket, and four self drilling screws. The
10- and 22-ft. cable kits include a fused power cable
and microphone hanger with a ground wire
10- and 22-ft. cable kits include a fused power cable
and microphone hanger with a ground wire
Key Cap Kit - A key cap kit which includes five caps
labeled for common functions is standard with each
transceiver. Optional kits are also available. Refer to
Section 2.8 for more key cap information.
labeled for common functions is standard with each
transceiver. Optional kits are also available. Refer to
Section 2.8 for more key cap information.
Table 1-2 Identification Number Breakdown
Table 1-3 98xx Accessories
Accessory
Part No.
Mounting Accessories
Front mounting kit
023-9800-030
Remote mounting kit
023-9800-040
10 ft. DC power cable and hardware kit 023-9800-410
22-ft. DC power cable and hardware
023-9800-422
Standard mounting bracket
017-2229-005
Low-profile mounting bracket
017-2229-010
98xx x A 10 0 A 12345
Model
Revision
Letter
Manufacture
Date
Warranty
Number
Week No. of Year
Last Digit of Year
A = Waseca
Type
Plant
From P.N.
1 = Low pwr LTR
2 = High pwr LTR
3 = High pwr Data MN
4 = Low pwr LTR-Net
5 = High pwr LTR-Net
6 = Low pwr Multi-Net
7 = High pwr Multi-Net
8 = Low pwr Data LTR
9 = High pwr Data LTR
0 = Low pwr Data MNet
A =
2 = High pwr LTR
3 = High pwr Data MN
4 = Low pwr LTR-Net
5 = High pwr LTR-Net
6 = Low pwr Multi-Net
7 = High pwr Multi-Net
8 = Low pwr Data LTR
9 = High pwr Data LTR
0 = Low pwr Data MNet
A =
SMARTNET/SmartZone
NOTE: Low power = 25W
UHF, 15W 800/900 MHz;
High power = 40W UHF,
30W 800/900 MHz)
UHF, 15W 800/900 MHz;
High power = 40W UHF,
30W 800/900 MHz)
Standard Key Cap Kits (5 key caps)
Multi-Net 587-9840-001
LTR-Net
587-9840-002
SMARTNET/SmartZone
587-9840-003
Optional Key Cap Kits (20+ key caps)
Multi-Net/LTR-Net 587-9840-004
SMARTNET/SmartZone
587-9840-105
Microphones
Standard amplified dynamic
250-0740-300
Standard DTMF w/lighted keypad
250-0751-021
WR 805 DTMF (weather resistant)
589-0016-029
Desk-type
250-0742-010
Remote Speaker, 5”, 15W, 4.7 ohm
250-0151-010
Remote conversion kit
250-9800-001
Remote control extension cable, 11 ft.
597-9800-009
Remote control pigtail cable (for xcvr)
597-9800-011
Accessory cable components
Accessory pigtail cable
597-9800-003
Accessory wire kit
023-9750-011
Data/accessory cable kit (both cables
included, w/o data connector)
included, w/o data connector)
597-9800-001
Data pigtail cable (data cable only w/o data
connector)
connector)
597-9800-005
Compander kit
250-9800-310
Encryption kit, Transcrypt
®
SC20-4xx
SC20-4xx
Desktop Power Supply
15 A, 117 VAC
239-0226-113
15 A, 230 VAC
239-0226-213
Wedge mounting pedestal kit (includes
10 ft. power cable)
10 ft. power cable)
023-8610-914
Programming Accessories
Remote Programming Interface (RPI)
023-9800-000
Cable, RPI to transceiver
597-2002-200
Cable, RPI to computer, 6 ft.
(DB9F to DB9M)
(DB9F to DB9M)
597-5900-002
Programming software (see manual
listed in Section 1.1.1)
Table 1-3 98xx Accessories (Continued)
Accessory
Part No.