EFJohnson 9800 SERIES User Manual

1-4

February 2001

Part No. 001-9800-001

Microphones and Speaker - The microphones have 
an impedance of 620 ohms, and all DTMF models 
have backlighted keypad but no memory for storing 
numbers. The WR805 microphone is environmentally 
sealed against such things as rain, sand, and dust. The 
desk microphone has a monitor button that can be 
locked down if desired.

 

The remote 15-watt speaker can be used instead 

of the internal speaker. It is non-amplified and weather 
resistant, and has a 6-ft. cable. It plugs into the 
external speaker jack in the back panel (with both 
front and remote mount applications), and the internal 
speaker is automatically disabled when it is used. 

Remote Mounting Components - The remote 
conversion kit converts the front panel of a front 
mount high tier transceiver to a remote control unit. It 
includes a blank front cover for the transceiver, a 
housing and 5-ft. control cable for the front panel, and 
a 1-ft. pigtail cable for connecting the control unit to 
the transceiver. If the control unit is to be mounted 
more than approximately 6 feet from the transceiver, 
the 11-ft. extension cable is required (see Figure 2-2). 

Accessory Cable - The -003 pigtail cable installs in 
the transceiver, and the wire kit is used to connect 
accessories to this cable. Included in the wire kit are 
two 22-ft. and three 2-ft. wire assemblies that can be 
used as desired. The accessory cable is required if such 
things as ignition switch control of power or the horn 
alert are used. Refer to Section 2.4 for installation 
information.

Data/Accessory Cable - The -001 cable assembly 
includes a data pigtail cable that plugs into J301 on the 
audio/logic board and also the accessory pigtail 
described above. The -005 cable assembly is a data 
cable only without the accessory cable. Neither cable 
includes the connector that interfaces with the data 
equipment, so it must be user supplied and installed. 
Installation of this cable is described in Section 2.7.

Compandor and Encryption Kits - The compandor 
kit includes a board assembly that installs in the option 
wire-outs on the audio/logic board to provide 
companding. Likewise, the encryption kit includes a 
board assembly that connects to the other option wire-
outs on the audio/logic board. Contact your sales 
representative for more information on available 
encryption options.

Desktop Accessories - The -113 and -213 power 
supplies include a pedestal for mounting the trans-
ceiver and also include an internal speaker. The wedge 
mounting pedestal includes a 10-ft power cable. Also 
required when this pedestal is used is one of the power 
supplies and the -010 low profile mounting bracket.

Programming Accessories - This RPI has design 
enhancements required for Flash programming the 
9800-series transceivers. It also has  jacks for injecting 
a microphone audio signal and monitoring receive 
audio when aligning the transceiver. Earlier RPIs 
(such as 023-9750-000 and 023-5810-000) can be used 
to program personality information if desired. 

The warranty statement for this transceiver is 

available from your product supplier or from the 
Warranty Department, E.F. Johnson Company, 299 
Johnson Avenue, P.O. Box 1249, Waseca, MN 56093-
0514. This information may also be requested from the 
Warranty Department by phone as described in 
Section 1.7. The Warranty Department may also be 
contacted for Warranty Service Reports, claim forms, 
or any other questions concerning warranties or 
warranty service.

The Customer Service Department of the E.F. 

Johnson Company provides customer assistance on 
technical problems and the availability of local and 
factory repair facilities. Regular Customer Service 
hours are 7:30 a.m. - 5:30 p.m. Central Time, 
Monday - Friday. The Customer Service Department 
can be reached at the following telephone numbers:

(From within continental United States only)

(You need to know the name of the person you 
want to reach. Example: jsmith@efjohnson.com)