Panasonic KX-FG6550 User Manual

been turned OFF (page 29), the base unit will 
not ring.

L

You can also program this feature with the 
handset (feature 0*11 and feature 0*12 on 
page 90).

{#}{

2}{2} Setting the journal report to print 

automatically
{

1} “

ON” (default): The unit will print a journal 

report automatically after every 30 new fax 
transmissions and receptions (page 55).
{

2} “

OFF”: The unit will not print a journal report, 

but will keep a record of the last 30 fax 
transmissions and receptions.

{#}{

2}{3} Sending documents overseas

If you cannot send a fax overseas even if the 
number is correct and the line is connected, 
activate this feature before sending the fax.
This feature improves the reliability by reducing 
the transmission speed.
{

1} “

NEXT FAX”: This setting is effective only for 

the next attempted fax transmission. After 
transmission, the unit will return to the previous 
setting.
{

2} “

OFF”: Deactivates this feature.

{

3} “

ERROR” (default): When the previous fax 

transmission fails and you wish to re-send the 
document.

L

This feature is not available for broadcast 
transmission.

L

Calling charges may be higher than usual.

{#}{

2}{5} Sending a fax at a specific time

This feature allows you to take advantage of low-
cost calling hours offered by your telephone 
company. This feature can be set up to 24 hours 
in advance of the desired time.
{

1} “

{

2} “

OFF” (default)

1. Insert the document.

2. If necessary, press {A} or {B} repeatedly to 

select the desired resolution (page 54).

3. Press {MENU}.

4. Press {#} then {2}{5}.

5. Press {1} to select “

ON”.

6. Press {SET}.

7. Enter the fax number.

8. Press {SET}.

9. Enter the transmission start time.

L

Press {*} repeatedly to select “

AM” or 

PM”.

10. Press {SET}.

FG6550-PFQX2225ZA-en.book  Page 80  Monday, August 8, 2005  8:16 PM