User ManualTable of ContentsBEFORE YOU BEGIN...................................................................................…. 12IMPORTANT SAFETY NOTICES..................................................................…. 22HARDWARE IDENTIFIER.....…....................................................................…. 42ASSEMBLY INSTRUCTIONS........................................................................…. 52EXPLODED DIAGRAM………………………………………………………………. 102PARTS LIST...............................................................................................……. 112WARRANTY.................................................................................................…. 122ORDERING PARTS.......................................................................................… 122HARDWARE PACK5ASSEMBLY INSTRUCTION6Attach the Leg Developer (#7) to the Front Leg (#5). Secure it with one M8 x 3 1/8” Allen Bolt (#31), two Ø 5/8” Washers (#35), and one M8 Aircraft Nut (#39).8Insert two Foam Tubes (#11) halfway through the holes on the Leg Developer. Push four Foam Rolls (#22) onto the Tubes from both sides.8Attach the Backrest Supports (#12) onto both ends of the pivot on the Main Seat Support (#3). Place the other end rest against the Backrest Adjustment Bar (#9).9Place the Backrest Board (#26) onto the Backrest Supports. Secure it with four M6 x 1 ½” Hex Bolts (#32) and Ø ½” Washers (#36).9Place the Seat Pad (#33) onto the Main Seat Support. Secure it with four M6 x 1 ¼” Hex Bolts (#33) and Ø ½” Washers (#36).9DIAGRAM 49Attach the Arm Curl Pad (#24) to the Arm Curl Stand (#6). Secure it with two M8 x 5/8” Allen Bolts (#30) and two Ø 5/8” Washers (#35).10Insert the Arm Curl Stand into the top opening on the Front Leg (#5). Use a Lock Knob (#14) to hold the Arm Curl Stand in position.10DIAGRAM 5101 Right Upright Beam 11219 Front Leg End Cap 11220 Ø 2 3/8” x Ø 2” Sleeve 11221 Ø 2” End Cap 312Size: 1.43 MBPages: 14Language: EnglishOpen manual