E&J 3F02-INS-LAB-REVB10 Manual De Usuario

All Traveler L4 arms feature the flip-back latch (see picture).

Flip arm back
1.  Press top of latch against arm 

and lift arm up out of socket.

2.  Swing arm up and back.

Lock arm
Push front of arm down into socket 
until it locks into place.

Adjust arm height (optional adjustable height arm only)
If your Traveler L4 arm is equipped 
with an upper arm release as shown 
at right, your arm height is adjust-
able. Arm height is adjusted by en-
gaging the upper arm release in one 
of several predrilled holes. To adjust:
1.  Pull upper arm release until it 

unlocks, freeing upper arm to 
move up and down. To keep in 
unlocked position while adjust-
ing arm height, turn the release knob 90 degrees.

2.  Holding upper arm by center of armpad, slide upper arm up or down 

to desired height. Ensure both front and back of armpad are at the 
same height.

3.  Rotate release knob back to former position and ensure that it locks 

into one of the adjustment holes. To ensure upper arm is securely 
locked, move arm up and down; if no movement occurs, arm is 
properly locked into place; if not, readjust until locked.