E&J 3F02-INS-LAB-REVB10 Manual De Usuario
3F02-INS-LAB-RevB10, March 2010 • Traveler L4 User Manual
15
hinge
plate
swingaway
release lever
remove footrest
(left shown)
FRONT RIGGING
FOOTREST—DETACHABLE, SWINGAWAY
WARNING: The footplates' lowest point should be no closer to
the ground than 2-1/2 inches, to permit proper clearance.
WARNING: Do not stand on the footplates; this could cause the
wheelchair to tip.
Remove footrest
1. To release lock, pull swinga-
1. To release lock, pull swinga-
way release lever forward,
toward front of wheelchair.
Footrest will swing outward.
toward front of wheelchair.
Footrest will swing outward.
2. To remove, lift footrest
straight up off wheelchair
hinge pins.
hinge pins.
Attach footrest
1. Set footrest on wheelchair
1. Set footrest on wheelchair
(so that footrest hinge plates
engage wheelchair hinge
pins).
engage wheelchair hinge
pins).
2. Swing footrest inward.
3. Ensure that swingaway
3. Ensure that swingaway
release lever is locked in a
rearward position, toward
back of wheelchair.
rearward position, toward
back of wheelchair.
WARNING: Ensure that footrests are locked in place before oc-
cupying or operating wheelchair.