Toshiba BDX2700KU Manual De Usuario

2. Press   /   to select Network List, then press OK. A 

list of existing wireless networks near the BD player will 
appear (It may take several seconds for this list to be 
created). For example:

3. Press   /   to select the desired wireless network, and 

press OK to confi rm.

Wireless Network, a menu similar to the following will 
appear:

4. Press   /   to highlight Connect, and press OK. If the 

wireless network is functioning, 

 icon and a message 

“Connection to XXX...Success” will appear on the TV.

5. Press OK to close the message. The BD disc player is 

now connected to the network. From now on, when you 
turn on the player, it will automatically connect to the 
network; there is no need to repeat these steps again.

Note: If you do not see this message, the BD player was 
not able to connect to the network.

Manual

WiFi Protected Setup (WPS)

IP Settings

Network List

1. Press   /   to select Wireless, then press OK to confi rm. 

the following screen will appear.

The symbols that might appear next to each listed wireless 
network in the network list are as follows:

Connected

When the BD player is 
turned on, it will connect 
to the wireless network 
displaying this symbol.  
Typically, this is the last 
wireless network connected 
before powering down.

Saved

The wireless network prop-
erties have been saved in 
the BD player’s memory.

Wireless Security

The wireless network data 
is not encrypted.

The wireless network data 
is encrypted; a ‘security key’ 
must be entered so that the 
BD player can share data 
over the network.

The wireless network data 
is encrypted; the encryption 
scheme is not supported by 
the BD player.

Wireless Protocol

The wireless network sup-
ports 802.11a

The wireless network sup-
ports 802.11b

The wireless network sup-
ports 802.11g

The wireless network sup-
ports 802.11n

Signal Strength

Strong Signal

Good Signal

Medium Signal

Weak Signal

No Signal

Wireless Network, a menu similar to the following will 
appear:

4. Press ENTER to activate the on-screen keyboard. 

Carefully enter the network password by using the   / 

 /   /   to highlight the desired letter on the keyboard, 

and then pressing OK. (If you make a mistake, use the 
backspace 

 key to erase the mistake.)

WiFi-me

Connect

WPS Pin

Delete

Cancel

Password

WiFi-me

Press ENTER to open keyboard

Connect

WPS Pin

Cancel

Network List

WiFi-me*

Panda

dlink_media

NTGR 11g

Airport_SN