Toshiba BDX2700KU Manual De Usuario

Function setup

Using WPS Pushbutton:

2. Press   /   to select WiFi Protected Setup (WPS), then 

press OK. 

3. Press   /   to select the desired wireless network, and 

press OK to confi rm.

4. Press   /   to highlight WPS PIN, and press OK. The 

following screen will appear:

5. Press   /   to highlight connection method you desire, 

and press OK.

6.  Follow the on-screen message to continue operating the 

connection.

Manual

WiFi Protected Setup (WPS)

IP Settings

Network List

1. Press   /   to select Wireless, then press OK to confi rm. 

the following screen will appear.

Password

WiFi-me

Press ENTER to open keyboard

Connect

WPS Pin

Cancel

WiFi Protected Setup (WPS)

Please press the button on your router now

Cancel

Network Name (SSID)

5. Use   /   /   /   to highlight 

 on the upper-right corner 

of the keyboard, and press OK to remove the keyboard 
from the screen.

6. Use   to highlight Connect, and press OK. If the 

wireless network is functioning, 

 icon and a message 

“Connection to XXX...Success” will appear on the TV.

7. Press OK to close the message. The BD player is now 

connected to the network. From now on, when you turn 
on the player, it will automatically connect to the network; 
there is no need to repeat these steps again.

Notes:

If you do not see this message, the BD player was not 

• 

able to connect to the network.
If the wireless network is 

• 

unsupported encryption (it appears in the network 
list with an icon), you cannot connect to the network. 
You must change the router’s encryption type before 
proceeding.

3.  Press the WPS button on the top of your router.

4.  Once you see “Success” on the button at the bottom of 

the screen, the BD player is connected to the router. 

Note: If you do not see this message, the BD player was not 
able to connect to the network. Repeat steps 1-4 again.

Using WPS PIN:

2. Press   /   to select Network List, then press OK. A 

list of existing wireless networks near the BD player will 
appear (It may take several seconds for this list to be 
created). For example:

Network List

WiFi-me*

Panda

dlink_media

NTGR 11g

Airport_SN