Black & Decker LLP120 Manual De Usuario

plastic, masonry or non-wood building materials.

- If any debris gets caught with the guard or tool discontinue use, 

disconnect power cord and clear debris.

- Worn chains and chain guide bars should be replaced.

- Only use replacement bars and chains specified by the manufacturer.

- This saw is intended for infrequent use by homeowners, cottagers, 

and campers, and for such general applications as clearing, pruning, 

cutting firewood, etc. It is not intended for prolonged use.  Prolonged 

periods of operation can cause circulatory problems in the user’s 

hands due to vibration.  For such use, it may be appropriate to use a 

saw having an anti-vibration feature.

Guard against kickback. Kickback is the upward motion of the guide bar 

that occurs when the saw chain, at the nose of the guide bar, contacts an 

object.  Kickback can lead to dangerous loss of control of the chain saw.

 The following features are included on your 

Alligator Lopper

TM

 to help reduce the hazard of kickback; 

however such features will not totally eliminate this dangerous 

reaction. As a chain saw user do not rely only on safety devices. 

You must follow all safety precautions, instructions, and 

maintenance in this manual to help avoid kickback and other forces 

which can result in serious injury.

Top Jaw - This has been designed specifically to cover the tip of the 

chain bar where the danger zone for kickback occurs. In the event of 

any kickback the guard also helps reduce the risk of the chain coming 

into contact with the operator.

Reduced Kickback Guide Bar - This has been designed with a small 

radius tip which reduces the size of the kickback zone on the bar tip.

Reduced Kickback Chain - Designed with a contoured depth gauge 

and guard link which deflect kickback force and allows wood to 

gradually ride into the cutter.

This tool and charger is double insulated; therefore no grounding 

wire is required. Always check that the power supply corresponds to 

the voltage on the rating plate. 

  Some dust created by power sanding, sawing, 

 • lead from lead-based paints,

 • crystalline silica from bricks and cement and other masonry  

     products, and 

 • arsenic and chromium from chemically-treated lumber. (CCA)

  Your risk from these exposures varies, depending on how often you 

do this type of work. To reduce your exposure to these chemicals:  

work in a well ventilated area, and work with approved safety 

equipment, such as those dust masks that are specially designed to 

filter out microscopic particles.

•  Avoid prolonged contact with dust from power sanding, 

water. Allowing dust to get into your mouth, eyes, or lay on the skin 

may promote absorption of harmful chemicals.

  Use of this tool can generate and/or disburse 

other injury. Always use NIOSH/OSHA approved respiratory 

protection appropriate for the dust exposure. Direct particles away 

from face and body.

  Wear appropriate personal hearing protection 

during use. Under some conditions and duration of use, noise 

from this product may contribute to hearing loss.