Black & Decker LLP120 Manual De Usuario

• Kickback, Rotational - The rapid upward and backward motion

of the saw which can occur when the moving saw chain near the

upper portion of the tip of the guide bar contacts an object, such as

a log or branch.

• low-Kickback Chain - A chain that complies with the kickback

performance requirements of ANSI B175.1-1991 (when tested on a 

representative sample of chain saws.)

• normal Cutting Position - Those positions assumed in 

performing the bucking and felling cuts.

• Reduced Kickback Guide Bar - A guide bar which has been

demonstrated to reduce kickback significantly.

• Replacement Saw Chain - A chain that complies with kickback

performance requirements of ANSI B175.1-1991 when tested

with specific chain saws. It may not meet the ANSI performance

requirements when used with other saws.

• Saw Chain - A loop of chain having cutting teeth, that cut the 

wood and that is driven by the motor and is supported by the guide bar.

• Switch - A device that when operated will complete or interrupt an

electrical power circuit to the motor of the chain saw.

• Switch linkage - The mechanism that transmits motion from a

trigger to the switch.

SAVE ThESE InSTRUCTIOnS: This manual contains important 

safety instructions for battery chargers.

• Before using charger, read all instructions and cautionary markings

on charger, battery pack, and product using battery pack.

 Shock hazard. Do not allow any liquid to get inside charger. 

 Burn hazard. To reduce the risk of injury, charge 

only designated Black & Decker batteries. Other types of batteries 

may burst causing personal injury and damage.

  Under certain conditions, with the charger plugged 

in to the power supply, the charger can be shorted by foreign 

The label on your tool may include the following symbols.

The symbols and their definitions are as follows:

• Bucking - The process of cross cutting a felled tree or log into lengths.

• Chain Brake - A device used to stop the chain saw.

• Chain Saw Powerhead - A chain saw without the saw chain and

guide bar.

• Clutch - A mechanism for connecting and disconnecting a driven

member to and from a rotating source of power.

• Drive Sprocket or Sprocket - The toothed part that drives the

saw chain.

• felling - The process of cutting down a tree.

• felling Back Cut - The final cut in a tree felling operation made on 

the opposite side of the tree from the notching cut.

• Guide Bar - A solid railed structure that supports and guides the saw chain.

• Kickback - The backward or upward motion, or both of the guide

bar occurring when the saw chain near the nose of the top area of

the guide bar contacts any object such as a log or branch, or when

the wood closes in and pinches the saw chain in the cut.

• Kickback, Pinch - The rapid pushback of the saw which can

occur when the wood closes in and pinches the moving saw chain

in the cut along the top of the guide bar.