Cisco Systems 2130 Manual De Usuario

Before removing or replacing the PCI riser assembly, you must first take the Cisco ADE 2130 and 2140 
Series appliance out of service, turn off the appliance by pressing the power button, disconnect any 
external cables, and unplug the AC power cord or DC power source from the appliance.

During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly 
touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94

To remove the PCI riser assembly: 

Review the information in the 

 and the 

.

Power down the appliance and all external devices. Disconnect the AC power cord or DC power source 
and all external cables.

Attach the antistatic wrist strap to your wrist and connect its cord to the ESD socket on the top, left-hand 
side on the front of the appliance.

Remove the appliance cover. For instructions, see the 

.

Disconnect any cables attached to any adapter cards.

Lift the riser assembly up to remove it. (See location 1 in 

.)

PCI riser assembly

Pins

A

B

231196