Cisco Systems 15454M6DC Manual De Usuario
7-12
Cisco ONS 15454 Installation and Operations Guide
November 2001
Chapter 7 Card Provisioning
Provisioning Electrical Cards
Procedure: Modify Line and Threshold Settings for the DS3XM-6 Card
Step 1
Display the DS3XM-6 in CTC card view.
Step 2
Click the Provisioning tab.
Step 3
Depending on the setting you need to modify, click the Line, Line Thrshld, Elect Path, or Sonet
Thrshld subtab.
Thrshld subtab.
Note
See
for information about the Alarm
Behavior tab.
Step 4
. For drop-down lists, select an item from the list. For numerics,
double-click the field and type the new number.
Table 7-5
DS3XM-6 Parameters
Subtab
Parameter
Description
Options
Line
Port #
Port number
1 - 6
Port
Port name
To enter a name for the port, click the
cell and type the name. To change a
name, double-click the cell, then edit
the text.
cell and type the name. To change a
name, double-click the cell, then edit
the text.
Line Type
Defines the line framing type
•
M23 - default
•
C BIT
Line Coding
Defines the DS-1 transmission
coding type that is used
coding type that is used
•
B3ZS
Line Length
Defines the distance (in feet)
from backplane connection to
the next termination point
from backplane connection to
the next termination point
•
0 - 225 (default)
•
226 - 450
Status
Places port in or out of service
•
Out of Service (default)
•
In Service
Line Thrshld
CV
Coding violations
Numeric. Defaults:
•
387 (15 minutes)
•
3865 (1 day)
ES
Errored seconds
Numeric. Defaults:
•
25 (15 minutes)
•
250 (1 day)
SES
Severely errored seconds
Numeric. Defaults:
•
4 (15 minutes)
•
40 (1 day)
Loss
Loss of signal
Numeric. Defaults:
•
10 (15 minutes)
•
10 (1 day)