Citizen CL-S6621 Manual De Usuario
49
Chapter 3 Printer Adjustments
Sensor Adjustments
Adjusting the Reflective sensor
1. Select the reflective sensor.
2. With the reflective sensor selected, install the label media
2. With the reflective sensor selected, install the label media
so that it is between the platen roller and the media sensor.
(Be careful that black mark and media gap do not pass the
media sensor.) Then close the sensor arm and the printhead.
(Be careful that black mark and media gap do not pass the
media sensor.) Then close the sensor arm and the printhead.
Black mark
Label
Liner media
Bottom sensor
3. If the PAUSE key is pressed and released while the MODE/
REPEAT key is pressed, PRINT LED goes off, the CONDITION
LED switches from lit to rapid flashing, media feeding starts,
and the sensor is automatically adjusted.
LED switches from lit to rapid flashing, media feeding starts,
and the sensor is automatically adjusted.
4. If automatic adjustment stops normally, the PRINT LED and
CONDITION LED return to their original status. If it does not
stop normally (adjustment impossible), the CONDITION LED
and ERROR LED flash.
stop normally (adjustment impossible), the CONDITION LED
and ERROR LED flash.
5. If the STOP key is pushed, it exits sensor adjustment mode.