Citizen CL-S6621 Manual De Usuario

Chapter 3 Printer Adjustments

Sensor Adjustments

The.sensing.level.of.both.the.transparent.(see.thru).and.reflective.sensors.
is.adjusted.separately.and.independently..Firstly,.the.sensor.type.must.
be.selected.either.using.the.VuePrint.menu.system.or.the.Sensor.Method.
Selection.shown.below..Then.the.adjustment.and.calibration.of.the.
sensor.can.be.made.

Entering Sensor Adjustment Mode

1. Turn on the power while pushing the PAUSE key, FEED key,

and STOP key simultaneously.

Power Switch

2. After the PRINT LED and CONDITION LED light up, release

the keys to change the printer to sensor adjustment setting
mode.

Quick Sensor Selection Method (Transparent  Reflective)

To.switch.from.transparent.to.reflective.sensor,.ensure.the.CONDITION.
LED.is.lit.then.hold.down.the.MODE/REPEAT.key.and.then.press.the.STOP.
key..Each.time.you.press.the.STOP.key,.you.switch.to.back.and.forth.
between.the.two.sensor.types.
If.the.transparent.sensor.is.selected,.the.PRINT.LED.lights.up.and.the.
buzzer.sounds.once...If.the.reflective.sensor.is.selected,.the.PRINT.LED.
flashes.slowly.and.the.buzzer.sounds.twice..