Siemens NCM S7 Manual De Usuario

213

SIMATIC NET NCM S7 for Industrial Ethernet
Release 6/2003

C79000–G8976–C129–07

If there are no configuration data on your PG/PC, follow the steps outlined below to
start diagnostics with a connected CP:

1. Open the Windows Start menu and select the command SIMATIC 

"

"

NCM S7 Diagnostics is started with the message “No online connection to the
CP” in the contents area.

2. In the displayed dialog “NCM S7 Diagnostics”, select the interface to match

your hardware configuration.

Depending on the type of network attachment you have, you will be prompted
to specify an address:

Table 7-2

Possible Settings for the Online Paths – without Parameters for Internetworking

MPI

MPI address of the CP if this has its
own MPI address.

Otherwise specify the MPI address of
the CPU.

Rack/slot no. of the CP to be
checked.

If you specify the MPI address of the
CP, you can simply use the default
setting “0/0”.

With this setting, the CP whose
address was specified as the node
address is accessed.

PROFIBUS

PROFIBUS address of the
PROFIBUS CP via which the S7
station is reached.

Rack/slot no. of the CP to be
checked.

Industrial Ethernet

MAC address of the Ethernet CP via
which the S7 station is reached.

Entered in hexadecimal.

Rack/slot no. of the CP to be
checked.

If you specify “0/0”, the CP specified
with the node address is accessed
directly.

Industrial Ethernet
TCP/IP

IP address of the Industrial Ethernet
CP via which the S7 station is
reached.

Entered in decimal.

Example: 
IP address decimal 142.120.9.134

Rack/slot no. of the CP to be
checked.

If you specify “0/0”, the CP specified
with the node address is accessed
directly.