Parker Products OEM650 Manual De Usuario
INSTALLATION • OEM650/OEM650X
6
3. Slide the drive cover back on.
4. Attach the motor (to A+, A-, B+, B-). Do not connect the motor to
the load at this time (refer to Figure 2-2 for 23 size motors or
Figure 2-3 for 34 size motors). OEM size 23 motors may be wired
in a series or parallel configuration. If you are using a 75VDC
power supply (OEM300) with the drive or drive indexer, Compumo-
tor recommends that you use a series configuration, however; a
parallel configuration should be used when the power supply is
24VDC - 48VDC. Parallel configurations will cause the drive to
dissipate slightly more heat than a serial configuration. This
increase in drive temperature will not affect the unit's performance,
but it may adversely affect heat-sensitive devices that are stored
within the same enclosure.
Figure 2-3 for 34 size motors). OEM size 23 motors may be wired
in a series or parallel configuration. If you are using a 75VDC
power supply (OEM300) with the drive or drive indexer, Compumo-
tor recommends that you use a series configuration, however; a
parallel configuration should be used when the power supply is
24VDC - 48VDC. Parallel configurations will cause the drive to
dissipate slightly more heat than a serial configuration. This
increase in drive temperature will not affect the unit's performance,
but it may adversely affect heat-sensitive devices that are stored
within the same enclosure.
RED
BLUE
GREEN
ORANGE
ORANGE
YELLOW
BLACK
BROWN
WHITE
Top View
RED
BLUE
GREEN
GREEN
ORANGE
YELLOW
YELLOW
BLACK
BROWN
WHITE
Top View
A-
B-
A+
B+
OEM
s
e
r
i
e
s
REMOTE
REF
CURRENT
DUMP
VDC+
VDC-
A+
A-
B+
B-
POWER
FAULT
}
OEM
s
e
r
i
e
s
REMOTE
REF
CURRENT
DUMP
VDC+
VDC-
A+
A-
B+
B-
POWER
FAULT
}
❐
Size 23 motors may be wired in series or parallel configurations
(OEM57-40-MO, OEM57-51-MO, OEM57-83-MO)
A-
B-
A+
B+
Size 23 OEM650 Motors: Series Wiring
Size 23 OEM650 Motors: Parallel Wiring
Figure 2-2. NEMA 23 Size OEM Motor Wiring—Series & Parallel