PioneerPOS G24-LC Manual De Usuario

The G24-L holds certain data items in selected memory space, named Software Registers 
(S-registers) and Modem Registers. Some of these registers are used as bitmaps, where one 
register holds more than one data item.

All S-registers can be accessed using the S command, described in 

. Some registers can also be accessed using dedicated commands, detailed below.

This command determines the response format of the data adapter and the contents of the header 
and trailer transmitted with the result codes and information responses. This command also 
determines whether the result codes are transmitted in a numeric or an alphabetic ("verbose") 
form. The text portion of information responses is not affected by this setting.

The following table shows the effect that setting this parameter has on the format of information 
text and result codes.

<ATV1><cr><lf>

0 - "OK"
1 - "CONNECT"
2 - "RING"
3 - "NO CARRIER"
4 - "ERROR"
5 - "NO DIALTONE"
6 - "BUSY"
7 - "NO ANSWER"

<verbose code><cr><lf>

The Set command sets the format of 
information responses and result 
codes.

The Read command reads the current 
setting of response format.

The Test command for V is not 
defined, and therefore is not supported 
by the G24-L. The G24-L returns an 
error.