Graco 312353B Manual De Usuario

If you are editing the RO while Matrix is attempting to 
add parts to it, the Matrix posting attempt will fail, since 
an R & R RO can only be edited by one person at any 
time.

In Matrix, when any posting error occurs, the record 
associated with this work order will turn red in the meter 
dispense history and Matrix will generate a popup win-
dows explaining the problem. You can manually retry the 
posting or cancel by right-clicking on the Work Order in 
the Meter Dispense History and selecting Retry Post-
ing Charges.

If no fluid was dispensed (dispense volume is 0), Matrix 
will not attempt to post charges of any kind to an R & R 
RO. 

If the PC cannot send a work order to the chosen meter 
for any reason, a Retry/Cancel pop-up box, as shown in 
F

. 61, will be displayed. Clicking Retry will make the 

PC attempt to send the work order again. Clicking Can-
cel will do just that, effectively deleting the work order at 
the PC; no more retries will be attempted.

There are several system conditions that can cause this 
to happen:

1.

The battery in the meter is very low or dead. With a 
dead battery, the meter cannot communicate to the 
PC. Replace the battery with a fully charged battery.

2.

The meter is already in the process of accepting a 
work order (possibly from another Matrix PC). Wait 
ten seconds and try sending it again.

3.

A poor RF signal between transceiver and meter 
can cause the work order to not be successfully 
delivered to the meter. You may need to move the 
transceiver closer to the meter.

4.

A meter cannot accept work orders while it is dis-
pensing fluid. It is unlikely that the meter and PC will 
get out of synch for this to happen. At the meter, end 
the dispense; the meter’s end-of-dispense message 
to the PC will cause the two to get back in synch.

The system is not always able to send new work 
orders from the PC. If this is the case, one of the fol-
lowing pop-up windows will appear to inform you 
that the work order was not received by the meter.

1.

Work Order Limit (F

IG

. 58). This message appears 

when the PC has five open work orders associated 
with the meter being addressed. No RF communica-
tion is attempted when this message appears. At 
least one work order will need to be processed or 
removed before a new one can be loaded.

2.

Work Order Already In Process (F

. 59). This 

message appears when the PC is attempting to 
send another work order. No RF communication is