Cognitive Solutions A799 Manual De Usuario

Chapter 3: Programming the Printer

 27

Revision D 12/09

A799-PG00001D

Specifications of print zone for 82.5 mm paper:
•  640 dots (addressable) @ 8 dots/mm, centered on 82.5mm
•  Standard mode: minimum margins: 1.0mm (0.040 inches)
•  Top margin to manual tear-off: 17.8mm (0.70 inches)
•  Top margin to knife cut: 19.0mm (0.75 inches)

Three commands control the rotation of printing. The table shows the combinations of set/cancel upside down print, set/
cancel rotated print (clockwise), and rotated print (counterclockwise). 
Rotated clockwise and rotated counterclockwise print commands are mutually exclusive: the setting of the last received 
command is effective. Unintended consequences may result when rotated clockwise is mixed with other commands.
The samples of the print show only the normal-size characters. Double-wide and double-high characters are printed in the 
same orientation. They may also be mixed on the same line.

(1B 7B n) 

(1B 56 n) 

Canceled 

Canceled 

Cleared 

Canceled 

Set 

X 

Set 

Canceled 

X 

Set 

Set 

X 

X 

X 

Set 

Note: The following print modes cannot be mixed on the same line:
•  Right-side up and upside-down
•  Single-high (normal) and double-high