Cognitive Solutions A799 Manual De Usuario

Chapter 3: Programming the Printer

28

Revision D 12/09

A799-PG00001D

The CognitiveTPG A799 printer may be operated in a number of different emulation modes. However, printing 
characteristics and defaults may differ, depending on the desired mode. For instance, two-color paper and ColorPOS

®

 

commands and features are available only in A799 native mode.

Refer to the chart below for defaults and allowed printing options in each emulation mode.

6.00, 6.77, 7.52, 8.13  Standard 

13X24 

7.52 

3 

Default setup for monochrome paper

 

 

Tall 

13X27 

6.77 

3 

 

 

 

ColorPOS

®

 

13X27 

6.77 

3 

Default setup for two-color paper 

A794, A793   6.00, 7.52, 8.13 

Standard 

13X24 

7.52 

3 

 

emulations 

6.00 

Tall 

13X27 

6.00 

7 

Default setup for LEGACY emulation 

emulation 

 

Standard 

13X24 

6.00 

10 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The following list clarifies how the A799 printer will behave in each emulation mode:
Two-color paper and ColorPOS

®

 commands and features are supported only in A799 native mode.

•  If the paper type is changed using the 0x1D 0x81 command, the font and default lines per inch (LPI) will be setup as in 

the table above.

•  If only the font is changed, the default LPI will automatically be changed as in the table above.
•  If emulation is switched to LEGACY, A794 or A793 emulation(s), the paper type will automatically be changed to 

monochrome paper, and the font and LPI will be changed as in the table above.

•  If emulation is switched from any emulation to A799 native, the font and LPI will remain unchanged because the A799 

native mode supports all font and LPI options offered in the emulation modes.

•  The “Set Default LPI” option in the configuration menu is not offered in LEGACY  emulation made. The LPI is set at 

6.00.