Lexmark 350d Manual De Usuario
Solving option problems
53
Troubleshooting
6
Press to save.
The control panel returns to
Config Menu / Reduced Curl
.
7
Press until
Exit Config Menu
appears, and then press
.
Activating Menu Changes
appears. Reduced Curl mode is turned on.
Resetting the Printer
appears briefly followed by
Performing Self Test
, and the printer returns to
Ready
.
Solving option problems
If an option does not operate correctly after it is installed or if it quits working:
•
Turn the printer off, wait for about 10 seconds, and turn the printer on. If this does not fix the problem, unplug the
printer from the wall outlet, and check the connection between the option and printer.
printer from the wall outlet, and check the connection between the option and printer.
•
Print the menu settings page, and check to see if the option is listed in the Installed Options list. If the option is not
listed, reinstall it. For more information, see Printing the menu settings page on page26.
listed, reinstall it. For more information, see Printing the menu settings page on page26.
•
Make sure the option is selected in the program you are using.
For Macintosh computer users: Make sure the printer is set up in the Chooser.
The following table lists printer options and suggested corrective actions for related problems. If the suggested corrective
action does not fix the problem, call your service representative.
action does not fix the problem, call your service representative.
Option
Action
250-sheet drawer
550-sheet dr awer
• Make sure the connection between the dr awer and the printer is secure.
• Make sure the print media is loaded correctly.
• Make sure the print media is loaded correctly.
Printer memory
Make sure printer memory is securely connected to the printer system board.