Kodak 8650 Manual De Usuario

 

Setting up the printer

2-18

October 1997

You must provide the necessary interface cables.Three power cords 
(North America/Japan, Europe Continental, and Australia) are included. 
If you will be using the printer outside these areas, you may need to 
purchase a power cord.

Standard communication ports are provided. Which ones are active 
depends on whether you have the 8650 Color Printer or the 8650 PS 
Color Printer. Ethernet ports will be in place if the optional Network 
Interface Card is installed.

The Centronics (Female) parallel port can be used for printing when 
the printer is in PostScript or raster mode.

The Mini Din 9-pin (Female) LocalTalk port can be used for printing 
when the printer is in PostScript mode.

The Submini 50-pin (Female) SCSI II ports can be used for printing 
when the printer is in raster mode, and for SCSI disk drive connections 
when the printer is in PostScript mode. A 50–pin submini SCSI II 
terminator is included with the printer. 

Ethernet 10BaseT (RJ45) and 10Base2 (BNC) ports are active in both 
PostScript and raster mode if the optional Network Interface Card is 
installed.

If the optional Network Interface Card is installed, Ethernet cabling is 
used. Refer to the Installation and Setup Guide for the 

KODAK Network 

Interface Card.

parallel port (PostScript or Raster 

LocalTalk port (PostScript printing

 

Ethernet port (if optional 

Network Interface Card is
installed) (PostScript or Raster

SCSI II ports (Raster printing only)

power cord inlet

printing)

only)

printing)