Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Kodak
  4. 8650
  5. Manual De Usuario

Kodak 8650 Manual De Usuario

Descargar
Página de 110
Setting up the printer
2-20
October 1997
two connectors.
3. Connect the LocalTalk cable to the two connectors.
4. Connect the power cord. See "Connecting the power cord" on 
5. Turn the printer 
On (press the power switch on the side of the printer 
to |).
IMPORTANT: The printer can initialize itself only if the computer is 
On.
Connecting a SCSI cable
The SCSI connection is active only when the printer is operating in 
raster mode. The default SCSI ID for the printer is 5. 
To connect a SCSI cable:
1. Make sure that both the printer and the computer are turned 
Off.
2. The default SCSI ID is 5. To change the SCSI ID see "About 
LocalTalk port
(PostScript printing only)