Axis Communications 540+ Manual De Usuario
Setting Up - NetWare
62
AXIS 540+/AXIS 560
Notes:
10. If you want to define a remote printer number slot manually, check the
Manual box and type the desired number in the box.
11. Click the
OK button to return to the Network Environments window.
Basic Queue-based printing over IP
Axis print servers with software version 6.0 or later allow users to print in a
Pure IP environment using traditional queue-based printing (which usually uses
the IPX transport protocol). Note that only NDS queue-based printing is
supported.
Pure IP environment using traditional queue-based printing (which usually uses
the IPX transport protocol). Note that only NDS queue-based printing is
supported.
In the NetWare Pure IP environment, you must use the NetWare Administrator
to create the printer, print server and queue objects.
to create the printer, print server and queue objects.
Installing the
Axis Network Print
Server
Follow the instructions below to install the Axis Network Print Server in the
NetWare Pure IP environment:
NetWare Pure IP environment:
1. Start the Configuration Wizard from the
User mode in the Axis Network
Print Server Web interface.
2. Click your way through the Wizard until reaching the
NetWare page.
3. Set the parameters on the NetWare page:
• PSERVER NDS Tree (example: NW5TREE)
or
PSERVER NDS File Server: (example: FILESERVERNAME)
• PSERVER NDS Distinguished Name:
(example: AXISXXXXXX.<context>, where <context> is the container
where you want to create your print server)
where you want to create your print server)
• You cannot type or edit the name manually.
• Make sure that you have PSERVER.NLM running if you selected Remote Printer Mode in step
• Make sure that you have PSERVER.NLM running if you selected Remote Printer Mode in step
8.