Axis Communications 540+ Manual De Usuario

AXIS 540+/AXIS 560

63

Setting the PSERVER parameters in the Axis Network Print Server Web interface.

4. Use the NetWare Administrator to create the printer, print server and queue 

objects in the NDS tree and then link them together. The 

Setup (Non-NDPS) utility can be used for this. Go to Tools in the NetWare 

Administrator.

5. Use the Add Printer Wizard on your work station to install the printer on your 

client. Note that only NDS queue based PSERVER printing is supported. When 
installing, choose 

Network Printer and browse to the queue you have just 

created. Alternatively, choose 

Local Printer and select the queue you have 

just captured.

Any configuration and management of the Axis Network Print Server can be 
performed from any standard Web browser. Please refer to Using a Web 

If both the IPX and IP protocols are enabled in your network and the print 
server uses DUAL_STACK (enabled by default) as its network transport protocol, 
then IPX will be chosen. To force the print server to use the IP transport 
protocol, go to your print server’s web interface and choose 

View | NetWare and change the NetWare Transport Protocol from 
DUAL_STACK to IP_ONLY. Save and exit when finished.

The following overview explains the advantages and limitations of the two 
supported queue-based printing methods.

Print Server Mode

The Axis Network Print Server logs in to a file server(s) and repeatedly polls the 
print queues for print jobs. In this fashion, the Axis Network Print Server 
emulates a NetWare print server, which is a workstation running PSERVER. It 
provides high printing speed with low network load and is the recommended 
mode for medium to large sized networks. Each print server in PSERVER mode 
takes one NetWare user license.

Pure IP requires that you run NetWare 5 or higher.