Axis Communications 540+ Manual De Usuario

78

AXIS 540+/AXIS 560

1. From www.axis.com, download the firmware and save it to the new 

directory on your computer, e.g. C:\ Axis

2. Open a command prompt from 

Start => Run.

The Run window will appear.
Type 

cmd and click OK.

3. The DOS Command Prompt window will open.

Type

 c: and press the Enter button on your keyboard.

4. The firmware is saved in C:\Axis

Type 

5. Type 

dir and press Enter.

The Axis directory you have created will list all files:

6. Connect to the print server using ftp.

Type 

(Example using print server IP address 10.13.4.105)

7. Type 

root after "User:", press Enter.

Type 

pass after "Password:" (your entry will not be visible) press Enter.

8. Change to binary mode transfer.

Type 

bin hash (or binary hash) and press Enter.

9. Use the 'put' command to upload the upgrade file to the flash location:

(Example using firmware named 540p_v2_6_43.bin):
Type 

put 540p_v2_6_43.bin FLASH (FLASH written in capital letters!)

Wait 30 seconds... You will receive a message stating "Transfer complete. Flash 
programming finished OK. "The print server will restart in five seconds running 
the new software. 
When you see a new 

ftp prompt the procedure has been completed 

successfully.

You can obtain all the print server firmware as well as the latest utility 
software from the following locations:

•

http://www.axis.com

•

your local dealer