Axis Communications 540+ Manual De Usuario

80

AXIS 540+/AXIS 560

When in Admin mode, you have access to all the print server's parameters and 
you can change them to your liking. This mode is intended for network 
administrators and can be password protected to prevent unauthorized 
changing of the print server parameters.

Follow the steps below to access the internal web pages of the Axis Network 
Print Server: 

1. Enter the print server’s IP address (or host name) in the 

Location/Address 

field of your Web browser. Press 

2. The 

Printer Overview page will appear. Click the admin button to access the 

Administration web pages.

3. You may be prompted for a password, enter the default user name 

root and 

the default password 

pass. Click OK.

The following services are available from the User mode. A link to the Axis 
home page is available from this mode.

The Printer Overview page contains a section that allows you to view the 
general parameter setting of the Axis Network Print Server, including the print 
server name and the location of the print server in your organization, if defined. 

By clicking the printer icon a printer page opens, allowing you to view the 
status and the supported capabilities ofconnected printer. The extent of this 
information depends on the printer model. From the printer page, you can also 
print a test page to the printer.

From the Print Jobs page you can view the status of the current print jobs, 
including the number of printed bytes and the origin of the print job. You can 
also view a log of the 20 latest print jobs that includes the user, the printing 
protocol and the file size. A log that displays the accumulated usage of the 
connected printers allows you to control the usage of the connected printers.

The Help page presents you with basic information about the Axis Network 

To protect the Admin pages from unauthorized use, enter a password in the Root Password field 
under Admin | General Settings

• It is highly recommended that you change the default password. This is done from the 

Admin | General Settings | General tab in the Root Password field

• You can address the print server’s Web interface via 

https:// To do this you must enable 

the SSL/TLS protocols in the web interface: 

TCP/IP and set the HTTPS Enabled parameter to Yes (you must have a valid certificate 
loaded).If you do not have a valid certificate loaded, select

and click