APC AP9290 Manual De Usuario
®
USER’S GUIDE
Vertical Console Port Server
4
Remote access to the control console
You can access the CLI through Telnet or SSH, depending on which is
enabled. (An administrator can enable these access methods through the
CLI.) Both Telnet and SSH are enabled by default.
enabled. (An administrator can enable these access methods through the
CLI.) Both Telnet and SSH are enabled by default.
Local access to the control console
You can use a local computer to access the control console.
1. Select a serial port such as COM1 or COM2 at the local computer and
disable any service which uses that port.
2. Connect the cable (APC part number 940-0214) to the selected port at
the local computer and to the configuration port of the VCPS.
3. Run a terminal program (such as HyperTerminal
®
), and configure the
selected port as follows:
– 9600 bps
– 8 data bits
– no parity
– 1 stop bit
– no flow control
Save the changes.
4. Press
E
NTER
to display the
login
prompt.
5. Enter your user name and password.
for details on how to use these protocols
to access the control console.