APC AP9290 Manual De Usuario

®

Any administrator can change any password, including the password for the 
permanent administrator. If all administrator passwords are lost, the entire 
configuration of the unit must be reset to defaults.

You can reset the user name and password for VCPS.

1. Press and hold the 

Reset

 button on the VCPS for 10 seconds. The 

status LED will turn from solid green to solid orange. 

2. After 10 seconds, the orange LED will blink four times. Release the 

button. 

3. The status LED will be solid orange and then begin blinking as VCPS 

restores its defaults. This will take up to 2 minutes.

4. The status LED will blink green when defaults have been restored.

The permanent administrator user name and password will be reset to the 
default of apc. All other users will be deleted. For proper security, change 
the password immediately.

Pressing the 

Reset

 button for ten seconds resets 

all

 VCPS 

settings.