Sony DVS-9000 Manual De Usuario

131

C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB03C01-WW.fm

Setup

  Chapter 1 

D

V

S-9000 Functions

DVS-9000/9000SF

3-704-674-01 (1)

• Internal Bus Link: Make a setting of the bus link function that links 

together two buses internal to the switcher.

• GPI Output Button Link: Make settings for linking any cross-point buttons 

or [CUT] and [AUTO TRANS] buttons in the cross-point control block and 
GPI output ports.

• GPI Input: Set the GPI input ports and trigger polarities, and make the 

action settings.

• GPI Output: Set the GPI output ports and trigger polarities, and make the 

action settings.

In DME setup, carry out settings particular to the DME processor.
You can make the following settings.

• Initial Crop: Make the initial crop setting for each button number in the 

cross-point assign main table.

• Matte Illeg. Color Limit: Switch the illegal limiter for the signal generated 

by the DME internal matte generator on or off.

• Editor Protocol: Set the protocol to be used on the Editor Port.
• GPI Input: Various settings for GPI Input 1 to 8 Ports.
• GPI Output: Various settings for GPI Output 1 to 8 Ports.

In DCU setup, carry out settings particular to the DCU.
You can make the following settings.
• Input Config: Assign GPI inputs to Parallel input ports.
• GPI Input Assign: Make GPI input settings.
• Output Config: Assign GPI outputs to parallel output ports inserted in an 

option slot.

• GPI Output Assign: Make GPI output settings.