Sony DVS-9000 Manual De Usuario

195

C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB05C03-WW.fm

Executing a Transition

  Chapter 3 

T

ransitions

DVS-9000/9000SF

3-704-674-01 (1)

In the bus fixed mode there is a fixed relationship between the position of the 
fader lever and the signal output on each bus. Depending on the direction of the 
transition, the fader lever must therefore always be moved in a particular 
direction, as shown in the following table. This does not affect an auto 
transition, which is executed regardless of the fader lever direction.

Fader lever operating direction in bus fixed mode

• When a transition applies to a combination of more than one of the 

background and keys 1, 2, 3, and 4, then the transition for all of these must 
be in the same direction complying with the above table.

• If as a result of an auto transition, for example, the fader lever position does 

not agree with the signal output, this is a non-sync state (see page 194) and 
LEDs light at both end positions of the fader lever travel. Moving the fader 
lever does not carry out a transition, but when the fader lever reaches the end 
position the non-sync state is released, and it is now possible to carry out the 
next transition. If the fader lever is moved in the direction away from the lit 
LEDs, this carries out the next transition, over the remaining part of the fader 
lever travel. 

The direction of a wipe is also in a fixed relationship to the fader lever 
movement direction.

Background

A 

t

 

B

Downward

B 

t

 A

Upward

Keys 1, 2, 3, and 4

On 

t

 Off (deletion)

Downward

Off 

t

 On (insertion)

Upward

Wipe

Normal

Upward

Reverse

Downward