Sony DVS-9000 Manual De Usuario
255
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB07C05-WW.fm
DVS9000WW\01GB07C05-WW.fm
masterpage:Right
Wipe Settings for Independent Key Transitions
Chapter 5
Wipes
DVS-9000/9000SF
3-704-674-01 (1)
2
Press the button for the desired pattern.
Setting Independent Key Transition Wipe Modifiers
Available modifiers
You can use the following modifiers with an independent key transition wipe.
Note that the available modifiers may depend on the pattern you are using.
• Direction
• Edge
• Positioner
• Rotation
• Aspect ratio
• Pattern replication
Note that the available modifiers may depend on the pattern you are using.
• Direction
• Edge
• Positioner
• Rotation
• Aspect ratio
• Pattern replication
Setting the wipe direction (Direction)
In the <Direction> group of the Key1 Wipe Adjust menu, make any of the
following selections.
following selections.
Normal: regular direction
Normal/Reverse: alternate between regular and reverse for each transition
Reverse: reverse direction to normal
Normal/Reverse: alternate between regular and reverse for each transition
Reverse: reverse direction to normal
Softening the wipe pattern edge (Soft edge)
Use the following procedure.
1
Press [Soft] in the Key1 Wipe Adjust menu, turning it on.
2
Set the following parameter.
Setting the wipe position (Positioner)
There are two methods of setting the wipe position: using the device control
block, or in a menu.
block, or in a menu.
For details of the method using the device control block, see “To set the wipe
position using the trackball” (page 247).
position using the trackball” (page 247).
To carry out the setting in a menu, use the following procedure.
Knob
Parameter
Adjustment
Setting values
1
Soft
Edge softness
0.00 to 100.00