Sony DVS-9000 Manual De Usuario

   Chapter 7 

F

rame Memor

y

C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB09C07-WW.fm

266

Frame Memory Operations

DVS-9000/9000SF

3-704-674-01 (1)

To output a frame memory image to a monitor, for example, the output signal 
from the frame memory (FM1 to FM8) must be allocated to a cross-point 
button. Carry out this allocation in the Setup menu.

Most frame memory operations are carried out using the Frame Memory menu.
To access the Frame Memory menu, use either of the following procedures.
• In the menu control block, select the top menu selection button [FRAME 

MEM].

• Press the cross-point button to which the frame memory output is allocated 

twice in rapid succession.

For the input image to frame memory, you can use either the signal selected on 
one of the two frame memory source buses or a dedicated color matte signal.
When using the signal on frame memory source bus 1 or 2 for the input image, 
select the signal as described below.

As an example, to select a signal on frame memory source bus 1, use the 
following procedure.

Using the bank selection buttons in the auxiliary bus control block, select 
the desired bank.