Sony DVS-9000 Manual De Usuario

267

C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB09C07-WW.fm

Frame Memory Operations

  Chapter 7 

F

rame Memor

y

DVS-9000/9000SF

3-704-674-01 (1)

In the auxiliary bus control block, press the AUX delegation button to 
which frame memory source bus 1 is allocated, turning it on.

In the key row of the bank selected in step 

, select the signal to be used 

for the input image.

For the signals on frame memory source buses 1 and 2, you can use the outputs 
of any one of the pairs: FM1&2, FM3&4, FM5&6, and FM7&8.
The following procedure describes how to allocate FM1&2; use the 
corresponding procedure for the other pairs.
You can select FM1, FM3, FM5 and FM7 for frame memory source bus 1, and 
FM2, FM4, FM6 and FM8 for frame memory source bus 2. 

In the Frame Memory menu, press one of VF1 to VF3 as desired, then 
select HF1 ‘Select.’

The VF1, VF2, or VF3 Select menu appears.

In the <Select> group, select whether to handle the outputs singly or in 
pairs.

Single: Handle FM1 (3, 5, 7) and FM2 (4, 6, 8) singly.
Pair: Handle FM1 (3, 5, 7) and FM2 (4, 6, 8) in pairs.

In the <FM1/2> group, press [FM1] or [FM2] to select the target output. If 
you selected [Pair] in step 

, then FM1 and FM2 are simultaneously 

selected.

This allocates frame memory source bus 1 to FM1, and frame memory 
source bus 2 to FM2.

To freeze the signal selected as input material, and write it to memory, use the 
following procedure.